see attachedOSH 4306 Unit VI Risk Assessment Form
Job Title:
Analyst Name:
Date:
Metal Lathe Operation
Task Description:
Setting up and operation of a metal lathe.
#
Task Steps
Hazard and Effect
Initial Risk
Risk Reduction Tactics
Residual Risk
Basic description of task steps recorded in sequence
Description and effect of existing and potential hazards based on observation and experience.
Severity
Likelihood
Risk Rating
Description of risk reduction tactics for each hazard using the Hierarchy of Controls method.
Severity
Likelihood
Risk Rating
1
Load workpiece onto lathe.
Potential back injuries or muscle strain; some workpieces weigh more than 50 pounds
2
Start lathe.
Possible entanglement with moving parts
3
Apply cutting tool to workpiece.
Hazardous noise; average 95dBA for an eight-hour work shift could cause hearing loss
4
Contact with metal chips; cuts and eye hazard
5
Contact with metal coolant; skin and eye contact.
6
Leaking hydraulic hoses; skin contact
7
Incorrect technique could cause cuts and crushing injuries
8
Incorrect posture could cause muscle strain and fatigue
9
Remove workpiece from lathe.
Potential back injuries or muscle strain
10
Slip and fall due to coolant or hydraulic fluid on floor
Comment/Discussion (200-word minimum)Risk Assessment for Metal Lathe
You have been asked to conduct a risk assessment for a metal lathe operation. The Job Hazard Analysis has already been completed, and hazards for the operation have been identified. The task steps and hazards have been entered on the risk assessment form. Click here to access it.
To complete the project, you will need to address the following criteria:
For each hazard listed, estimate its severity and likelihood using the risk matrix on page 283 of the course textbook. This initial estimation assumes no risk control tactics are applied. Use the matrix to assign a risk rating based on the estimated severity and likelihood. Enter these numbers in the appropriate initial risk columns on the form.
Implement one or more risk-reduction tactics for each hazard using the hierarchy of controls method. Describe these tactics in the appropriate column on the form.
In the comments section of the form, summarize the changes in risks that resulted after control tactics were applied and whether the risks have been reduced to an acceptable or tolerable level. Are there any additional actions that you recommend be taken? The discussion section must be at least 200 words.
Why Choose Us
- 100% non-plagiarized Papers
- 24/7 /365 Service Available
- Affordable Prices
- Any Paper, Urgency, and Subject
- Will complete your papers in 6 hours
- On-time Delivery
- Money-back and Privacy guarantees
- Unlimited Amendments upon request
- Satisfaction guarantee
How it Works
- Click on the “Place Order” tab at the top menu or “Order Now” icon at the bottom and a new page will appear with an order form to be filled.
- Fill in your paper’s requirements in the "PAPER DETAILS" section.
- Fill in your paper’s academic level, deadline, and the required number of pages from the drop-down menus.
- Click “CREATE ACCOUNT & SIGN IN” to enter your registration details and get an account with us for record-keeping and then, click on “PROCEED TO CHECKOUT” at the bottom of the page.
- From there, the payment sections will show, follow the guided payment process and your order will be available for our writing team to work on it.